Difference between revisions of "U620L Novatel"
(→udev rule) |
(→pfSense) |
||
| Line 35: | Line 35: | ||
=pfSense= | =pfSense= | ||
Creating an Auto-eject rule: http://sysmagazine.com/posts/187702/ | Creating an Auto-eject rule: http://sysmagazine.com/posts/187702/ | ||
| + | |||
| + | =how to set CDC-ECM permanently= | ||
| + | |||
| + | I contacted Novatel and they would not tell me how to do this. | ||
| + | |||
| + | http://192.168.1.1/fieldtest/ | ||
| + | *Put it in debug mode | ||
| + | *This also gives you serial access too: screen /dev/ttyACM0 115200 | ||
| + | **I do not know the login and password | ||
Revision as of 14:31, 25 July 2016
Contents
AKA
VERIZON USB620L MC620
INFO
QUALCOMM 3G/4G
Config Background
Available modes of the device are RNDIS and CDC-ECM.
RNDIS is a Microsoft proprietary protocol used mostly on top of USB. It provides a virtual Ethernet link to most versions of the Windows and Linux operating systems. A partial RNDIS specification is available from Microsoft, but Windows implementations have been observed to issue requests not included in that specification, and to have undocumented constraints.
CDC-ECM is Ethernet over USB.[1]
Device Modes
End-User Mode: Enumerating CDC-ECM interface - In this mode, the device is used for a WWAN connection to the Internet for such activities as browsing or connecting to a VPN.
pacman -Sv usb_modeswitch lsusb sudo usb_modeswitch -v 0x1410 -p 0x9020 -u 2 ip link sudo dhcpd in73rf4c3
Enterprise Mode: Enumerating CDC-ECM and Modem interfaces (Optional) - In this mode, the Modem interface allows users to send AT commands to the device to configure, query, or manage the Internet connection.
I do not understand Enterprise mode, they say CDC-ECM AND modem interfaces? Does it give both interfaces at once? The guide asks you to compile option.c and usb-wwan.h which are definitions for USB serial mobile broadband cards. It just involves adding a driver line that associates the device with the driver.
udev rule
nano /etc/udev/rules.d/99-vzw_u620l.rules
SUBSYSTEM=="usb", ATTR{idVendor}=="1410", ATTR{idProduct}=="9020", ATTR{bConfigurationValue}=="1", ATTR{bConfigurationValue}="2"
Save
sudo udevadm control --reload
Notes: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=121326&p=819522
pfSense
Creating an Auto-eject rule: http://sysmagazine.com/posts/187702/
how to set CDC-ECM permanently
I contacted Novatel and they would not tell me how to do this.
- Put it in debug mode
- This also gives you serial access too: screen /dev/ttyACM0 115200
- I do not know the login and password
- I do not know the login and password
