Sick Beard

From Hack Sphere Labs Wiki
Revision as of 18:11, 29 August 2015 by Webdawg (talk | contribs) (sabnzbdplus autoProcessTV.cfg)

Jump to: navigation, search

debian jessie

sudo apt-get install python-cheetah
mkdir ~/sickbeard
cd sickbeard
git clone git:// my-sickbeard-install

Create a systemd service file (adjust below...)[1]

nano /lib/systemd/system/sickbeard.service


# Sickbeard systemd service unit file
# Configuration Notes
#    - Option names (e.g. ExecStart=, Type=) appear to be case-sensitive)
#    - Adjust ExecStart= to point to your python and Sickbeard executables.
#    - Adjust User= and Group= to the user/group you want Sickbeard to run as.
#    - WantedBy= specifies which target (i.e. runlevel) to start Sickbeard for.
# equates to runlevel 3 (multi-user text mode)
#  equates to runlevel 5 (multi-user X11 graphical mode)

Description=Internet PVR for your TV Shows

ExecStart=/usr/bin/python /home/sabnzbd/sickbeard/



You configure sickbeard to pass nzbs through the api but then you have to do the post processing thing.

mkdir ~/.sabnzbd/scripts
cd autoprocessTV/
nano autoProcessTV.cfg.sample
mv autoProcessTV.cfg.sample autoProcessTV.cfg
cp autoProcessTV.* ~/.sabnzbd/scripts/
cp ~/.sabnzbd/scripts/

Through the web interface:


add your scripts post processing folder...


I restarted sabnzbdplus but now knows but now again Through the web interface:

  • add a tv catagory
  • Script:
  • processing +Delete (but sickbeard can do this to? that is after processing delete original data....)
  • I add TV to the path so it does not mix in with the rest of the downloads

Click Add to save


As far as I know so far you do not have to configure the top of post processing (the Config->Post-Processing, the the Post-Processing SECTION) unless you want to manually process downloaded through scanning and not use the scripts.