Sick Beard

From Hack Sphere Labs Wiki
Revision as of 18:10, 29 August 2015 by Webdawg (talk | contribs) (debian jessie)

Jump to: navigation, search

debian jessie

sudo apt-get install python-cheetah
mkdir ~/sickbeard
cd sickbeard
git clone git://github.com/midgetspy/Sick-Beard.git my-sickbeard-install

Create a systemd service file (adjust below...)[1]

nano /lib/systemd/system/sickbeard.service

File:

# Sickbeard systemd service unit file
#
# Configuration Notes
#
#    - Option names (e.g. ExecStart=, Type=) appear to be case-sensitive)
#
#    - Adjust ExecStart= to point to your python and Sickbeard executables.
#
#    - Adjust User= and Group= to the user/group you want Sickbeard to run as.
#
#    - WantedBy= specifies which target (i.e. runlevel) to start Sickbeard for.
#        multi-user.target equates to runlevel 3 (multi-user text mode)
#        graphical.target  equates to runlevel 5 (multi-user X11 graphical mode)

[Unit]
Description=Internet PVR for your TV Shows

[Service]
ExecStart=/usr/bin/python /home/sabnzbd/sickbeard/SickBeard.py
Type=simple
User=sabnzbd
Group=sabnzbd

[Install]
WantedBy=multi-user.target

sabnzbdplus autoProcessTV.cfg

You configure sickbeard to pass nzbs through the api but then you have to do the post processing thing.

mkdir ~/.sabnzbd/scripts
cd autoprocessTV/
nano autoProcessTV.cfg.sample
mv autoProcessTV.cfg.sample autoProcessTV.cfg
cp autoProcessTV.* ~/.sabnzbd/scripts/
cp sabToSickBeard.py ~/.sabnzbd/scripts/

Through the web interface:

/config/folders/

add your scripts post processing folder...

/home/username/.sabnzbd/scripts

I restarted sabnzbdplus but now knows but now again Through the web interface:

/config/categories/
  • add a tv catagory
  • Script: sabToSickBeard.py
  • processing +Delete (but sickbeard can do this to? that is after processing delete original data....)
  • I add TV to the path so it does not mix in with the rest of the downloads

Click Add to save

Configuration: http://sickbeard.com/config.html

As far as I know so far you do not have to configure the top of post processing (the Config->Post-Processing, the the Post-Processing SECTION) unless you want to manually process downloaded through scanning and not use the scripts.
  1. http://sickbeard.com/forums/viewtopic.php?f=6&t=2415