LSI Raid Firmware Bios Flashing

From Hack Sphere Labs Wiki
Revision as of 00:49, 27 April 2013 by Webdawg (talk | contribs) (Created page with "Best way is to create a UEFI boot disk as you will get command errors if you do not in most situations, at least in DOS. Get the firmware use the sas2flash.efi Create a usb ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Best way is to create a UEFI boot disk as you will get command errors if you do not in most situations, at least in DOS.

Get the firmware use the sas2flash.efi

Create a usb key with fat16 and then create the following: /EFI/boot Get the shell.efi (it sounds like you need the older shell.efi because it supports older versions of EFI specs.) cp shell.efi to /EFI/boot/boot.efi for 32bit/ bootx64.efi 64bit.


use the shellx64.efi

Boot into the EFI shell...

Run the proper command:

Retrieved from "https://wiki.hackspherelabs.com/index.php?title=LSI_Raid_Firmware_Bios_Flashing&oldid=1278"