Difference between revisions of "LSI Raid Firmware Bios Flashing"
From Hack Sphere Labs Wiki
(Created page with "Best way is to create a UEFI boot disk as you will get command errors if you do not in most situations, at least in DOS. Get the firmware use the sas2flash.efi Create a usb ...") |
|||
Line 4: | Line 4: | ||
use the sas2flash.efi | use the sas2flash.efi | ||
− | Create a usb key with fat16 and then create the following: | + | Create a usb key with fat16 and then create the following: |
− | /EFI/boot | + | /EFI/boot |
− | Get the shell.efi (it sounds like you need the older shell.efi because it supports older versions of EFI specs.) | + | Get the shell.efi (it sounds like you need the older shell.efi because it supports older versions of EFI specs.) |
− | cp shell.efi to /EFI/boot/boot.efi for 32bit/ bootx64.efi 64bit. | + | cp shell.efi to /EFI/boot/boot.efi for 32bit/ bootx64.efi 64bit. |
Revision as of 00:49, 27 April 2013
Best way is to create a UEFI boot disk as you will get command errors if you do not in most situations, at least in DOS.
Get the firmware use the sas2flash.efi
Create a usb key with fat16 and then create the following: /EFI/boot Get the shell.efi (it sounds like you need the older shell.efi because it supports older versions of EFI specs.) cp shell.efi to /EFI/boot/boot.efi for 32bit/ bootx64.efi 64bit.
use the shellx64.efi
Boot into the EFI shell...
Run the proper command: