Bacula and Bareos
CentOS 6.5 Install
yum install mysql-server mysql-devel
service mysqld start chkconfig mysqld on mysqladmin -u root password Y0uR3l173P455w0rd
yum install bareos-database-mysql yum install bareos
/usr/lib/bareos/scripts/create_bareos_database -u root -p /usr/lib/bareos/scripts/make_bareos_tables -u root -p /usr/lib/bareos/scripts/grant_bareos_privileges -u root -p
service bareos-dir start service bareos-sd start service bareos-fd start
Links
- http://www.unixmen.com/install-and-configure-bacula-server-in-centos-6-4-rhel-6-4/
- http://www.bareos.org/en/documentation.html
- http://doc.bareos.org/master/html/bareos-manual-main-reference.html
Archlinux GUI Admin
yaourt bareos-bat
Configure On CentOS 6.5
Since I use disks I start with installing vchanger
The link above has a script but it looks like the one on sourceforge (which is referenced in the link) is newer and compiles. Even then, I decided to pull the rpm from pbone
wget ftp5.gwdg.de/pub/opensuse/repositories/home:/pstorz/CentOS_CentOS-6/x86_64/vchanger-0.8.6-10.3.x86_64.rpm yum install vchanger-0.8.6-10.3.x86_64.rpm
- I am going to start with one drive so first I am going to format it (create a partition first (cfdisk)):
- Quote:
Assuming the drive was assigned node /dev/sdc, the partition can now be formatted and labeled using:
mke2fs -t ext4 -O large_file /dev/sdc1
This will create a new ext4 file system on the partition. Now unplug the drive, wait a few seconds, then plug it back in. After re-attaching the drive, the name of the symlink in /dev/disk/by-uuid pointing to the filesystem partition's device node, (/dev/sdc1 in the example above), will reveal the UUID that can be used in a magazine directive in a vchanger configuration file to assign the removable drive to an autochanger. On many systems, the UUID of the filesystem can also be determined with the blkid command.
ls -al /dev/disk/by-uuid/
The Bacula Storage Daemon does not usually run as root. Since vchanger will be invoked by the Storage Daemon, and so will run as the same user it does, permissions for the magazine's mounted filesystem must be set to allow write access to the user that the Storage Daemon runs as. This can be done by mounting the new partition somewhere, then using chown and chmod to set the appropriate permissions to allow write access for the user that the Storage Daemon runs as.
mkdir /media/temp mount /dev/xvdc1 /media/temp chown bareos:bareos -R /media/temp
Need to get autofs up and running so it mounts the disks and stuff:
yum install autofs
nano /etc/auto.vchanger
- add
# /etc/auto.vchanger * -fstype=auto,rw,sync :/dev/disk/by-uuid/& # eof
- Then:
nano /etc/auto.master
- add
/mnt/vchanger /etc/auto.vchanger --timeout=30
- then
service autofs restart
ls -al /mnt/vchanger/UUID so
ls -al /mnt/vchanger/3c22af77-4881-4a7f-bcfc-517744c964db
