Revision as of 11:25, 1 August 2014

nano /etc/default/tftp<tab>

Add -v to see verbose in daemon.log

DRBL

dhcpd.conf and default file

Files needed for DRBL pxelinux testing 4.05

/bios/core/pxelinux.0 -> nbi_img
/bios/com32/chain/chain.c32 -> nbi_img/bios/
/bios/com32/hdt/hdt.c32 -> nbi_img/bios/
/bios/core/isolinux.bin -> nbi_img/bios/
/bios/com32/mboot/mboot.c32 -> nbi_img/bios/
/bios/mbr/mbr.bin -> nbi_img/bios/
/bios/memdisk/memdisk -> nbi_img/bios/
/bios/com32/menu/menu.c32 -> nbi_img/bios/
/bios/com32/modules/sanboot.c32 -> nbi_img/bios/
/bios/com32/menu/vesamenu.c32 -> nbi_img/bios/

script generated (run from root syslinux dir extracted)

mkdir nbi_img
mkdir nbi_img/bios
cp bios/core/pxelinux.0 nbi_img/
cp bios/com32/chain/chain.c32 nbi_img/bios/
cp bios/com32/hdt/hdt.c32 nbi_img/bios/
cp bios/core/isolinux.bin nbi_img/bios/
cp bios/com32/mboot/mboot.c32 nbi_img/bios/
cp bios/mbr/mbr.bin nbi_img/bios/
cp bios/memdisk/memdisk nbi_img/bios/
cp bios/com32/menu/menu.c32 nbi_img/bios/
cp bios/com32/modules/sanboot.c32 nbi_img/bios/
cp bios/com32/menu/vesamenu.c32 nbi_img/bios/

Files needed for DRBL pxelinux testing 6.03-pre18

nbi_img/pxelinux.cfg/default

The

PATH bios/

Is pretty important!

dhcpd.conf follows

# Created by generate-pxe-menu! Do NOT edit unless you know what you are doing! 
# Keep those comment "MENU DEFAULT" and "MENU HIDE"! Do NOT remove them.
# Note!!! If "serial" directive exists, it must be the first directive

default vesamenu.c32
timeout 5
prompt 0
noescape 1
MENU MARGIN 5
MENU BACKGROUND drblwp.png
# Set the color for unselected menu item and timout message
MENU COLOR UNSEL 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT_MSG 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT 7;32;41 #c0000090 #00000000
MENU COLOR HELP 7;32;41 #c0000090 #00000000

# MENU MASTER PASSWD

say **********************************************
say Welcome to DRBL.
say NCHC Free Software Labs, Taiwan.
say http://drbl.nchc.org.tw; http://drbl.sf.net
say **********************************************

# Allow client to edit boot parameters
ALLOWOPTIONS 1

PATH bios/

# simple menu title
MENU TITLE DRBL (http://drbl.nchc.org.tw, http://drbl.sf.net)

label drbl
  # MENU DEFAULT
  # MENU HIDE
  MENU LABEL Debian 7.0 Linux (DRBL mode, mostly local resources)
  # MENU PASSWD
  kernel vmlinuz-pxe
  append initrd=initrd-pxe.img devfs=nomount drblthincli=off selinux=0     clientdir=node_root
  TEXT HELP
  * DRBL version: 2.3.12-drbl1. (C) 2003-2013, NCHC, Taiwan
  * Disclaimer: DRBL comes with ABSOLUTELY NO WARRANTY
  ENDTEXT

label clonezilla
  MENU DEFAULT
  # MENU HIDE
  MENU LABEL Clonezilla: multicast restore AnImage to disk sda
  # MENU PASSWD
  kernel vmlinuz-pxe
  append initrd=initrd-pxe.img devfs=nomount drblthincli=off selinux=0 text 1     clientdir=node_root ocs_opt="-l en_US.UTF-8  -g auto -e1 auto -e2 -r --clone-hidden-data -p true --mcast-port 2232 multicast_restoredisk E5510.V1.WIN7.BAREBASE-SES sda"
  TEXT HELP
  * Clonezilla version: 3.3.10-drbl1. (C) 2003-2013, NCHC, Taiwan
  * Disclaimer: Clonezilla comes with ABSOLUTELY NO WARRANTY
  ENDTEXT

label local
  # MENU DEFAULT
  # MENU HIDE
  MENU LABEL Local operating system (if available)
  # MENU PASSWD
  # 2 method to boot local device:
  # (1) For localboot 0, it is decided by boot order in BIOS, so uncomment the follow 1 line if you want this method:
  # localboot 0

  # (2) For chain.c32, you can assign the boot device.
  # Ref: extlinux.doc from syslinux
  # Syntax: APPEND [hd|fd]<number> [<partition>]
  # [<partition>] is optional.
  # Ex:
  # Second partition (2) on the first hard disk (hd0);
  # Linux would *typically* call this /dev/hda2 or /dev/sda2, then it's "APPEND hd0 2"
  #
  kernel chain.c32
  append hd0
  TEXT HELP
  Boot local OS from first hard disk if it's available
  ENDTEXT

# Note! *.bin is specially purpose for syslinux, 
# Do NOT use memtest86.bin, use memtest86 instead of memtest86.bin
label memtest
  # MENU DEFAULT
  MENU HIDE
  MENU LABEL Memory test using Memtest86+
  # MENU PASSWD
  kernel memtest86
  TEXT HELP
  Run memory test using Memtest86+ Memtest86 v4.20
  ENDTEXT

# ref: http://syslinux.zytor.com/memdisk.php
label fdos
  # MENU DEFAULT
  MENU HIDE
  MENU LABEL FreeDOS
  # MENU PASSWD
  kernel memdisk
  append initrd=fdos1440_drbl.img
  TEXT HELP
  Run FreeDOS
  ENDTEXT

label drbl-terminal
  # MENU DEFAULT
  MENU HIDE
  MENU LABEL Debian 7.0 Linux (Terminal mode, mostly remote resources)
  # MENU PASSWD
  kernel vmlinuz-pxe
  append initrd=initrd-pxe.img devfs=nomount drblthincli=on
  TEXT HELP
  Run DRBL in terminal mode.
  ENDTEXT

# Example for AoE booting
label AoE-client
  # MENU DEFAULT
  MENU HIDE
  MENU LABEL Diskless client (AoE booting)
  # MENU PASSWD
  kernel sanboot.c32
  append aoe:e0.0
  TEXT HELP
  Boot from AoE device
  ENDTEXT

# Example for Xen client. ///NOTE/// You might have to copy the required file, e.g. xen-3.0.3-1-i386-pae.gz in this case, from /boot to /tftpboot/nbi_img manually.
# label Xen client
  # MENU DEFAULT
#   MENU HIDE
#   MENU LABEL Xen client 
#   # MENU PASSWD
#   kernel mboot.c32
#   append xen-3.0.3-1-i386-pae.gz --- vmlinuz-2.6.18-6-xen-vserver-686 root=/dev/sda1 ro console=tty0 --- initrd-pxe.2.6.18-6-xen-vserver-686.img
#   TEXT HELP
#   DRBL client running on Xen kernel
#   ENDTEXT

# Example for Clonezilla live PXE booting
# //NOTE// Remember to change the file names to match your files and check parameters in syslinux/syslinux.cfg from the zip file, copy them to here. It might be different from here, say vmlinuz1 path maybe different.
#label Clonezilla Live
  # MENU DEFAULT
#  MENU HIDE
#  MENU LABEL Clonezilla Live
#  # MENU PASSWD
#  kernel vmlinuz1
#  append initrd=initrd1.img boot=live union=aufs noswap noprompt nolocales ip=frommedia vga=788 fetch=tftp://$YOUR_SERVER_IP/filesystem.squashfs
#  TEXT HELP
#  Boot Clonezilla live via network
#  ENDTEXT


# Example for GParted live PXE booting
# //NOTE// Remember to change the file names to match your files and check parameters in syslinux/syslinux.cfg from the zip file, copy them to here. It might be different from here, say vmlinuz1 path maybe different.
#label GParted Live
  # MENU DEFAULT
#  MENU HIDE
#  MENU LABEL GParted Live
#  # MENU PASSWD
#  kernel vmlinuz1
#  append initrd=initrd1.img boot=live union=aufs noswap noprompt ip=frommedia vga=788 fetch=tftp://$YOUR_SERVER_IP/filesystem.squashfs
#  TEXT HELP
#  Boot GParted live via network
#  ENDTEXT

file structure=

nbi_img/gpxelinux.0
nbi_img/ldlinux.c32
nbi_img/ldlinux.e32
nbi_img/ldlinux.e64
nbi_img/mboot.c32
nbi_img/memdisk
nbi_img/memtest86
nbi_img/pxelinux.0
nbi_img/bios/chain.c32
nbi_img/bios/hdt.c32
nbi_img/bios/isolinux.bin
nbi_img/bios/libcom32.c32
nbi_img/bios/libutil.c32
nbi_img/bios/mboot.c32
nbi_img/bios/mbr.bin
nbi_img/bios/memdisk
nbi_img/bios/menu.c32
nbi_img/bios/sanboot.c32
nbi_img/bios/vesamenu.c32 

/bios/com32/elflink/ldlinux/ldlinux.c32
/bios/com32/elflink/ldlinux/ldlinux.elf
/bios/com32/lib/libcom32.elf
/bios/com32/lib/libcom32.c32